VECTOR HTN
Lapping and polishing additive (recirculating)
VECTOR HTN was developed for use in “high-speed recirculating” and “highspeed once-through” slurry pumping systems. Utilizing the energy of a highspeed pump, standard on most lapping machines, it evenly disperses aluminum oxide, cerium oxide, silicon carbide, boron carbide, and garnet abrasive. It also reduces abrasive usage by eliminating “hard-packing” and waste. Note: VECTOR HTN should not be used in “low shear” mixing / pumping systems.
Highlights
No scratching
Increased
removal rate
Less
sub-surface damage
Easier post-lap
cleaning
No hard packing
Non-corrosive
Less abrasive waste
Product Specifications
Base material
Water
Shelf life
24 months
Applications
Gallium arsenaide, germanium, sapphire, silicon, silicon carbide
| Slurry additive | Base material | Dilution ratio | pH value | Specific gravity |
|---|---|---|---|---|
| VECTOR HTN | Water | 20:1 | 9.0 | 1.00 |
| VECTOR HTS | Water | 25:1 | 9.0 | 1.00 |
| VECTOR HTG | Water | 75:1 | 9.8 | 1.03 |
| VECTOR HTI | Water | 400:1 | 12.3 | 1.02 |
Interested in our
VECTOR HTN Lapping and polishing additive?
We are happy to share our knowledge with you
and remain at your disposal for any further questions.
and remain at your disposal for any further questions.
Adam Nielsen
- Product Manager
- +1 480 505 3425
- anielsen@pureon.com
