CHALLENGE 550HT
Slurry additive for suspending non - treated abrasives(recirculating)
CHALLENGE 550HT was developed for use in “high-speed recirculating” and “high-speed once-through” slurry pumping systems. Utilizing the energy of a high speed circulating pump, standard on most lapping machines, it evenly disperses aluminum oxide, cerium oxide, silicon carbide, boron carbide, and garnet abrasive. It also reduces abrasive usage by eliminating “hard-packing” and waste.
Highlights
No scratching
Increased
removal rate
Less
sub-surface damage
Easier post-lap
cleaning
No hard packing
Non-corrosive
Less abrasive waste
Product Specifications
Base material
Water
Shelf life
24 months
Applications
Ceramic, fused silica,
glass, poly carbonate lens
Product Specifications
Base material
Water
Shelf life
24 months
Applications
Ceramic, fused silica,
glass, poly carbonate lens
| Slurry additive | Base material | Dilution ratio | pH value | Specific gravity |
|---|---|---|---|---|
| CHALLENGE 540HT | Water | 19:1 (5%) | 9.1 | 1.00 |
| CHALLENGE 543HT | Water | 25:1 (3.8%) | 9.1 | 1.00 |
| CHALLENGE 550HT | Water | 19:1 (5%) | 9.9 | 1.01 |
| CHALLENGE 555HT | Water | 19:1 (5%) | 9.9 | - |
Interested in our
CHALLENGE 550HT Slurry additive?
We are happy to share our knowledge with you
and remain at your disposal for any further questions.
and remain at your disposal for any further questions.
Adam Nielsen
- Product Manager
- +1 480 505 3425
- anielsen@pureon.com
